The new version of Hayame coilovers for 01-up Civic and 02-up
RSX received a slight design improvement, which may lead to
some confusion during installation.
In order to improve the alignment and positioning of the
tie-rod in relation to the coilover, we redesigned the coilover
arm to accept the tie-rod on the under side rather than the
top of the arm. In other words, the tie-rod should be rotated
180 degrees, and inserted through the bottom of the coilover
arm. Installed this way, the taper will properly accept the
tie-rod and there is no need to enlarge the hole.
Please Note: We strongly recommend that you have
The Hayame Coilovers professionally installed by reputable
installation service centers specifically trained to install
aftermarket coilover systems. Serious injury may
occur if installation is not properly done. We are not responsible
for any damage due to incorrect installation.
For installation questions and specifications please contact:
Kyle
Axiom Motorsports
Lakewood, WA
Tel: 253-722-1012
Hours: Mon-Sat: 9am-6pm
Honda
Upper Strut Bar
•
Bracket is completely CNC machined
with the same styling as the Hayame Billet engine
components for a completely cohesive look to your
engine bay
•
Increases chasis rigidity by connecting
the front strut towers
•
Greatly improves handling responsiveness
•
Available in Polished Alum., Blue,
or Red
92-95 Civic/Del Sol
HAY30.11.02.X
99-00 Civic Si
HAY30.11.04.X
94-00 Integra
HAY30.11.04.X
90-93 Accord
HAY30.12.07.X
94-97 Accord
HAY30.12.09.X
98-01 Accord (4cyl.)
HAY30.12.11.X
92-96 Prelude Si/S/VTEC
HAY30.12.15.X
97-00 Prelude
HAY30.12.17.X
Color legend for part numbers:
Polished Alum.
X=1
Blue
X=2
Red
X=3
Eclipse
Upper Strut Bar
•
Bracket is completely CNC machined
with the same styling as the Hayame Billet engine
components for a completely cohesive look to your
engine bay
•
Increases chasis rigidity by connecting
the front strut towers
•
Greatly improves handling responsiveness
•
Available in Polished Alum., Blue,
or Red
95-99 Eclipse (Non-Turbo)
HAY30.13.05.X
95-99 Eclipse (Turbo)
HAY30.13.06.X
Color legend for part numbers:
Polished Alum.
X=1
Blue
X=2
Red
X=3
Every Hayame product is CNC machined
from 6061 aluminum and hand assembled to be sure you
get the best products available. Everything from the
high-flow billet fuel rails to the ultra lightweight
racing lugs have been tested and tuned to the utmost
accuracy. Superior fit and finish mean a product you
can be truly proud to own.
To find a local dealer for retail
purchases call us direct at 909-923-7500.
Coil-Overs
You
can download an installation note explaining this new feature
here:
